Catalog 2010-2011, Final Edition 
    
    Jun 17, 2024  
Catalog 2010-2011, Final Edition [ARCHIVED CATALOG]

Course Descriptions


Course Information

Course Load

The normal course load for a full-time student is from 12 to 18 credit hours. An employed student should vary a course load for the semester according to the number of hours the student works. It is recommended that such a student consult with an advisor about his or her schedule. Students who wish to complete a 2-year degree in 2 years, excluding summers, should take at least 15 credits per term.

Course Numbering

0-99     Precollege level courses not designed for transfer to other institutions. These courses do not count for college credit and are not used in grade point average calculation for graduation.
100-199   Courses normally taken by freshmen.
200-299   Courses normally taken by sophomores.

Attendance

Students are expected to attend all classes for which they are registered, except in case of illness or other emergencies. The instructor shall determine and inform students of the effects of absences on the grade. If any student accumulates so many absences that continued enrollment in the class seems to be of little value, the student may be asked by the instructor to withdraw from the course. The instructor may assign a final grade or develop an Incomplete contract with the student if the student has successfully completed 75% of the course. Withdrawals must be processed by the deadline shown in the schedule of classes.

Repeating Courses

A student who earns a grade of “D” or “F” may repeat the course to raise the grade to a “C” or better to meet the performance level required for subsequent courses. The course may be used only once to meet the graduation requirements of a particular degree or certificate program. A student may not repeat a course in which the student received a letter grade of “C” or higher without instructor approval. All grades will be listed on the student’s transcript and will be computed in the student’s grade point average (GPA) unless either a “Fresh Start” or “Grade Replacement” policy applies. See Grading System  for explanation of these two policies.

 

Art

  
  • ART 238 - Photography III

    Credits: 3
    Explores photography technique with emphasis on history, theory, and assimilation of ideas into the students’ creative work. Includes the development of a comprehensive portfolio. Prerequisite(s): ART 138 or ART 139. Three credits.
  
  • ART 241 - Jewelry and Metal Work III

    Credits: 3
    Focuses upon advanced work and emphasizes experimentation with materials and techniques, individual designs, and superior craftsmanship. Prerequisite(s): None. Three credits.
  
  • ART 242 - Jewelry and Metal Work IV

    Credits: 3
    Provides continued study of the properties of metal and stone in creating decorative work. Students employ advanced design and techniques to explore original, personal expression. A variety of materials and approaches are used in discovering new and independently creative finished pieces. Three credits.
  
  • ART 243 - Digital Photography II

    Credits: 3
    Expands upon the beginning digital photography class. Focuses on digital photography in terms of design and communication factors including color, visual design, lighting, graphics, and aesthetics. Prerequisite(s): ART 143 or permission of instructor. Three credits.
  
  • ART 250 - Art of Animation

    Credits: 3
    Introduces character development and transitions from one media to another. Students learn the foundational skills necessary to create the illusion of life for sketched characters. Focuses on the traditional medium of paper and pencil to turn ideas into visual treatment for creating animatics by use of a light box and computer. Character development and storyboarding by script are emphasized. Three credits.
  
  • ART 252 - Landscape Photography

    Credits: 2
    Focuses on traditional and contemporary approaches to landscape photography. Examines technical and aesthetic aspects of landscape photography through group discussions, a field study, lectures, and print and slide critiques. Two credits.
  
  • ART 253 - Studio Photography

    Credits: 3
    Explores the creative uses of studio lighting from the perspective of fine art photography with an emphasis on portraiture, three dimensional object photography, and two dimensional collage photography. Three credits.
  
  • ART 256 - Advanced Figure Drawing

    Credits: 3
    Provides continuing study of the various methods of drawing the human figure, with emphasis on the description of form and individual style. Student must be at least 16 years of age to enroll in this class. Prerequisite(s): None. Three credits.
  
  • ART 261 - Ceramics III

    Credits: 3
    Encourages students to develop an individual style of wheel thrown and hand-built ceramic forms with continuing involvement in surface treatment. Prerequisite(s): None. Three credits.
  
  • ART 262 - Ceramics IV

    Credits: 3
    Continues advanced work with emphasis on various clay bodies, unique glazes and engobes, and combining different textures and shapes, and development of personal forms. Three credits.
  
  • ART 263 - Handbuilt Clay III

    Credits: 3
    Covers advanced problems with importance placed on large scale pieces that promote creativity with techniques and combinations of different textures. Prerequisite(s): None. Three credits.
  
  • ART 268 - Sculpture III

    Credits: 3
    Focuses on advanced individual sculpture projects, emphasizing experimentation with materials, accomplished technique and conceptual significance. Prerequisite(s): None. Three credits.
  
  • ART 269 - Ceramic Sculpture

    Credits: 3
    Explores a variety of processes to create three-dimensional images in clay. Focuses on hand-built sculptures, without using a potter’s wheel and relying on very basic tools. Encourages creative experimentation and engaging in the process. Three credits.
  
  • ART 285 - Independent Study

    Credits: 1 to 6
    Provides structured and guided, individualized research that is organized and tailored around the interests and needs of the individual student. Prerequisite(s): Permission of department chair is required. One to six credits.

Astronomy

  
  • AST 101 - Astronomy I [SC1]

    Credits: 4
    Focuses on the history of astronomy, the tools of the astronomer and the contents of the solar system including the planets, moons, asteroids, comets, and meteoroids. Incorporates laboratory experience. This course is a state guaranteed transfer course GT-SC1. Prerequisite(s): MAT 099 or higher (except MAT 107, 108, 112, 175). Four credits.
  
  • AST 102 - Astronomy II [SC1]

    Credits: 4
    Emphasizes the structure and life cycle of the stars, the sun, galaxies, and the universe as a whole, including cosmology and relativity. Incorporates laboratory experience. This course is a state guaranteed transfer course GT-SC1. Prerequisite(s): MAT 099 or higher (except MAT 107, 108, 112, 175). Four credits.
  
  • AST 175 - Special Topics

    Credits: 1 to 6
    (Formerly: AST 185) Provides students with a vehicle to pursue in depth exploration of special topics of interest. Prerequisite(s): Permission of instructor. One to six credits.
  
  • AST 185 - Independent Study

    Credits: 1 to 6
    (Formerly: AST 295) Meets the individual needs of students. Students engage in intensive study or research under the direction of a qualified instructor. Prerequisite(s): Permission of instructor. One to six credits.

Automotive Collision Technology

  
  • ACT 101 - Intro to Auto Collision Tech

    Credits: 4
    Designed as an orientation to the automotive collision repair industry. Students receive an overview of job possibilities as well as learn various types of automobile construction. Names, uses and maintenance procedures for a variety of tools and equipment are covered. Focuses on general collision repair and refinishing shop safety procedures with an emphasis on personal and environmental safety issues. Students also learn the proper handling and disposal of hazardous materials. Prerequisite(s): None. Four credits.
  
  • ACT 111 - Metal Welding and Cutting I

    Credits: 3
    Covers sheet metal oxygen-acetylene welding and MIG welding techniques including safety, materials, equipment and setups. Personal and vehicle protective measures prior to welding procedures are presented. Prerequisite(s): ACT 101 or permission of Instructor. Three credits.
  
  • ACT 121 - Non-Structural Repair Prep

    Credits: 3
    Covers the basic characteristics of preparation for automotive repair. Students familiarize themselves with damage analysis, extent of damage and the sequence of repair. Focuses on removal of vehicle components and protection of panels along with storage and labeling of parts. Safety procedures and equipment use are included. Prerequisite(s): ACT 101 or permission of Instructor. Three credits.
  
  • ACT 122 - Panel Repair and Replacements

    Credits: 3
    Covers straightening techniques including tension pulls/stress relief, metal finishing, metal shrinking and use of fillers. Emphasizes the identification, handling and replacement of parts such as adjustment and alignment of bolt-on parts, fixed parts and accessories. Training covers the use of adhesives, sound deadeners and welding methods performed during repairs. Prerequisite(s): ACT 101 or permission of Instructor. Three credits.
  
  • ACT 123 - Metal Finishing/Body Filling

    Credits: 3
    Covers metal finishing, metal shrinking and the use of cosmetic fillers. Emphasis is placed on the use of proper tools required to perform these tasks, including use, selection and safety procedures for tools and equipment selected. Prerequisite(s): ACT 101 or permission of Instructor. Three credits.
  
  • ACT 131 - Structural Damage Diagnosis

    Credits: 3
    Focuses on methods of frame measurement using dimension charts and service manuals. Includes the use of self-centering gauges and mechanical and electronic measuring. Appropriate terms and definitions of vehicle structures and vehicle diagnosis is covered including identification and analysis of damage. Includes the techniques for basic hook ups and safety procedures used in making corrective pulls. Prerequisite(s): ACT 101 or permission of instructor. Three credits.
  
  • ACT 132 - Structural Damage Repair

    Credits: 3
    Continues the study and application of frame measurement and repair. The student applies methods found in dimension charts and service manuals for vehicle diagnosis and straightening. Training includes the replacement of a structural panel with the identification of damaged suspension components replaced according to manufacturer’s recommendations. Prerequisite(s): ACT 101 or permission of instructor. Three credits.
  
  • ACT 141 - Refinishing Safety

    Credits: 1
    Covers correct use of safety procedures used in refinishing. Proper fit and use of various types of protective equipment is emphasized. The identification of tools and equipment, with use and maintenance is covered including national guidelines for proper disposal and handling of hazardous materials. One credit.
  
  • ACT 142 - Surface Preparation I

    Credits: 2
    Covers surface preparation for refinishing including cleaning, sanding, feather edging, chemical treatment of bare materials and priming. The application of primers, including rationale and use is covered. In addition the student learns skills for proper removal and storage of exterior trim and protection of adjacent panels. Prerequisite(s): ACT 141 or permission of instructor. Two credits.
  
  • ACT 143 - Spray Equipment Operation

    Credits: 2
    Covers the inspection, cleaning and determination of the condition of spray guns and related equipment. Students learn skills for adjusting spray guns by setting-up and testing spray gun operations. Prerequisite(s): ACT 142 or permission of instructor. Two credits.
  
  • ACT 144 - Refinishing I

    Credits: 2
    Provides the knowledge needed for application and use of automotive paint systems. Course includes locating color codes, mixing formulas, matching and selections of materials. Proper paint gun use and adjustments is taught for the product being applied. In addition, the student practices correct masking and detailing techniques. Prerequisite(s): ACT 142 and ACT 143. Two credits.
  
  • ACT 151 - Plastics and Adhesives I

    Credits: 1
    Designed to teach the state-of-the-art repair for both rigid and flexible plastic components and choosing adhesives using the latest manufacturer’s repair techniques. Prerequisite(s): ACT 101 or permission of instructor. One credit.
  
  • ACT 170 - Auto Collision Lab Exper I

    Credits: 1 to 9
    Designed to prepare the student to perform basic tasks for a specialized area in a controlled instructional lab. Prerequisite(s): None. One to nine credits.
  
  • ACT 171 - Auto Collision Lab Exper II

    Credits: 1 to 9
    Course is a continuation of Lab experience. Designed to prepare the individual to perform basic tasks for a specialized area in a controlled instructional lab. Prerequisite(s): None. One to nine credits.
  
  • ACT 172 - Auto Collision Lab Exper III

    Credits: 1 to 9
    Course is a continuation of Lab experience. Designed to prepare the individual to perform basic tasks for a specialized area in a controlled instructional lab. Prerequisite(s): None. One to nine credits.
  
  • ACT 175 - Special Topics

    Credits: 1 to 9
    Assists students who are interested in individual topics within the normal curriculum. The student identifies and selects objectives that he/she needs for industry upgrades or special training to enter the workforce. The student may explore current topics, issues or activities related to one or more aspects of the Automotive Collision industry. Prerequisite(s): None. One to nine credits.
  
  • ACT 176 - Special Topics

    Credits: 0 to 6
    Provides students with a vehicle to pursue in depth exploration of special topics of interest. Prerequisite(s): None. Zero to six credits.
  
  • ACT 177 - Special Topics

    Credits: 0 to 6
    Provides students with a vehicle to pursue in depth exploration of special topics of interest. Prerequisite(s): None. Zero to six credits.
  
  • ACT 180 - Auto Collision Internship I

    Credits: 1 to 9
    Designed to meet the needs of the student in selected specialized area in a work-based environment. Individualized instruction at the job site is coordinated based on student’s interest and instructor approval. Prerequisite(s): permission of instructor. One to nine credits.
  
  • ACT 181 - Auto Collision Internship II

    Credits: 1 to 9
    Course is a continuation of Level I Internship. Student uses the knowledge and skills acquired throughout the ACT program in a job site placement. Prerequisite(s): permission of instructor. One to nine credits.
  
  • ACT 205 - Estimating and Shop Management

    Credits: 3
    Initiates written estimates on damaged vehicles. Students learn shop management including work orders, ordering supplies, operating costs, time cards, shop liabilities, employee’s safety and insurance management issues. Prerequisite(s): ACT 101 or permission of instructor. Three credits.
  
  • ACT 211 - Metal Welding and Cutting II

    Credits: 2
    Covers mig welding procedures of seam weld, stitch welds and destructive testing. Resistance spot welding, which includes two-sided spot weld, plasma cutting, safety, materials, and equipment and operating procedures, with emphasis on shop safety are also presented. Prerequisite(s): ACT 111. Two credits.
  
  • ACT 221 - Moveable Glass and Hardware

    Credits: 2
    Covers door glass, vent windows and glass mechanisms (both electric and mechanical) with emphasis on removal and replacement. In addition, interior trim panels, seats and headliners are removed and replaced. Student learns proper care and treatment of vehicle seat protectors plus the proper use of tools required to perform these tasks. Prerequisite(s): ACT 101 or permission of instructor. Two credits.
  
  • ACT 231 - Adv Struct Damage Diag/Repair

    Credits: 3
    Covers major automotive body repair in vehicles with major damage on conventional structures and unibody structures. Student learns the operation of equipment and techniques used to straighten and align damaged frames. Identification and analysis of frames, hot and cold stress relieving, servicing and sectioning of structural frames is also included. Liability issues and the importance of making these corrections according to the manufacturer’s recommendations and industry standards are emphasized. Prerequisite(s): ACT 131, ACT 132, and ACT 133 or permission of instructor. Three credits.
  
  • ACT 232 - Fixed Glass Repair

    Credits: 2
    Covers the removal and replacement of fixed glass using manufacturer’s specifications, proper tools and recommended materials. Application of skills are demonstrated and utilized for the removal and replacement of modular glass using manufacturer’s specifications and procedures. Prerequisite(s): ACT 101 or permission of instructor. Two credits.
  
  • ACT 241 - Paint Defects

    Credits: 3
    Covers paint defects. Emphasizes the causes of paint defects with methods to cure problems during and after refinishing procedures. Students learn to identify the proper surface preparations to apply prior to refinishing. Training includes using paint equipment and determining paint film thickness with proper temperatures for refinishing. Three credits.
  
  • ACT 242 - Surface Preparation II

    Credits: 2
    Emphasizes surface preparation for refinishing including cleaning, sanding, feather edging, chemical treatment of bare metals and priming. The application of primers, including why and where using them is covered. Prerequisite(s): ACT 142 and ACT 143. Two credits.
  
  • ACT 243 - Refinishing II

    Credits: 2
    In this advanced course students learn the necessary skills used to tint and blend panels working with the latest finishes and paints. Special coatings and procedures are covered in this course. Prerequisite(s): ACT 242. Two credits.
  
  • ACT 244 - Final Detail

    Credits: 2
    Focuses on the detailing procedures in paint refinishing of vehicles. Methods and techniques are specialized to enhance painting skills. Transfers and tapes methods with decals etc. are demonstrated. Prerequisite(s): ACT 141 or permission of instructor. Two credits.
  
  • ACT 251 - Plastics and Adhesives II

    Credits: 1
    Emphasizes advanced plastic and adhesives. The current state-of-the-art repairs for both rigid and flexible plastic components using the latest manufacturer’s repair techniques are presented. Sheet Molded Compound procedures and the use of proper adhesives is covered. Prerequisite(s): ACT 151. One credit.
  
  • ACT 265 - Street Rod I

    Credits: 6
    Introduces the student to the Street Rod industry to include safety practices, tools, and equipment, automobile construction, the repair estimate, welding and cutting, characteristics and properties of sheet metal, damage analysis, sequence of repair, straightening techniques, metal finishing, and the use and application of body fillers. Prerequisite(s): ACT 101, ACT 110, ACT 111, ACT 121, ACT 122, ACT 123, ACT 142, ACT 143, ACT 144, ACT 211, ACT 241, and ACT 243 or permission of instructor. Six credits.
  
  • ACT 266 - Restraint Systems

    Credits: 1
    Students learn to inspect, remove and replace active restraint systems, passive restraint systems and supplemental restraint systems. Procedures are demonstrated for disarming and diagnosing restraint systems using electronic equipment and trouble codes. Instruction for passive restraint replacement is also covered in this course. Prerequisite(s): None. One credit.
  
  • ACT 267 - Street Rod II

    Credits: 6
    Continues Street Rod I to include safety practices, tools and equipment, automobile construction, the repair estimate, welding and cutting, characteristics and properties of sheet metal, damage analysis, sequence of repair, straightening techniques, metal finishing, and the use and application of body fillers. Prerequisite(s): ACT 265. Six credits.
  
  • ACT 268 - Street Rod III

    Credits: 6
    Continues Street Rod II to include engine mounting, transmission mounting, frame assembly procedures, body modification including frenching, chop tops, shaving and sectioning procedures, sheet metal fabrication, body reconstruction, and metal fabrication. Prerequisite(s): ACT 267. Six credits.
  
  • ACT 269 - Street Rod IV

    Credits: 6
    Continues Street Rod III to include electrical systems, wiring and installation, body assembly and refinishing, interior vehicle modifications, brake system design and mounting, final vehicle assembly, and custom painting to include graphics, flames, special effects, and color sanding and polishing. Prerequisite(s): ACT 268. Six credits.
  
  • ACT 275 - Special Topics

    Credits: 1 to 9
    Assists students who are interested in individual topics within the normal curriculum. The student identifies and selects objectives that he/she needs for industry upgrades or special training to enter the workforce. The student may explore current topics, issues or activities related to one or more aspects of the Automotive Collision industry. Prerequisite(s): None. One to nine credits.
  
  • ACT 276 - Special Topics

    Credits: 0 to 6
    Provides students with a vehicle to pursue in depth exploration of special topics of interest. Prerequisite(s): None. Zero to six credits.

Automotive Service Technology

  
  • ASE 101 - Auto Shop Orientation

    Credits: 2
    Provides students with safety instruction in the shop and on the Automobile. Emphasis is placed on the proper use and care of test equipment, precision measuring and machining equipment, gaskets, adhesives, tubing, wiring, jacks, presses, and cleaning equipment and techniques. Prerequisite(s): None. Two credits.
  
  • ASE 102 - Intro to the Automotive Shop

    Credits: 2
    Prepares the incoming automotive student to work in the shop safely and gain familiarity with the shop and common equipment. Prerequisite(s): ASE 101 or permission of Department. Two credits.
  
  • ASE 110 - Brakes I

    Credits: 3
    Covers basic operation of automotive braking systems. Includes operation, diagnosis, and basic repair of disc brakes, drum brakes, and basic hydraulic systems. Prerequisite(s): ASE 101 and ASE 102 or permission of Department. Three credits.
  
  • ASE 120 - Basic Auto Electricity

    Credits: 2
    Introduces automotive electricity and includes basic electrical theory, circuit designs, and wiring methods. Focuses on multi-meter usage and wiring diagrams. Prerequisite(s): ASE 101 and ASE 102 or permission of Department. Two credits.
  
  • ASE 123 - Battery/Starting/Charging

    Credits: 2
    Covers the operation, testing, and servicing of automotive battery, starting, and charging systems. Includes voltage and amperage testing of starter and generator, load testing and maintenance of a battery, and starter and generator overhaul. Prerequisite(s): ASE 101, ASE 102 and ASE 120 or permission of Department. Two credits.
  
  • ASE 130 - General Engine Diagnosis

    Credits: 2
    Focuses on lecture and related laboratory experiences in the diagnosis and necessary corrective actions of automotive engine performance factors. Prerequisite(s): ASE 101 and ASE 102 or permission of Department. Two credits.
  
  • ASE 132 - Ignition System Diag / Repair

    Credits: 2
    Focuses on lecture and related laboratory experiences in the diagnosis, service, adjustments and repair of various automotive ignition systems. Prerequisite(s): ASE 101, ASE 102 and ASE 130 or permission of Department. Two credits.
  
  • ASE 134 - Automotive Emissions

    Credits: 2
    Focuses on lecture and laboratory experiences in the diagnosis and repair of automotive emission control systems. Prerequisite(s): ASE 101, ASE 102 and ASE 130 or permission of Department. Two credits.
  
  • ASE 140 - Suspension and Steering I

    Credits: 3
    Focuses on lecture and related experiences in the diagnosis and service of suspensions and steering systems and their components. Prerequisite(s): ASE 101 and ASE 102 or permission of Department. Three credits.
  
  • ASE 150 - U-joint & Axle Shaft Service

    Credits: 2
    Studies the operating principles and repair procedures relating to axle-shaft and universal joints. Prerequisite(s): ASE 101 and ASE 102 or permission of Department. Two credits.
  
  • ASE 151 - Man Trans/Transaxles&Clutches

    Credits: 2
    A comprehensive course combining lecture and related laboratory experiences in the diagnosis and repair of automotive manual transmissions, transaxles and clutches and related components. Prerequisite(s): ASE 101 and ASE 102 or permission of Department. Two credits.
  
  • ASE 152 - Differentials & 4WD/AWD Repair

    Credits: 2
    A comprehensive course combining lecture and related laboratory experiences in the diagnosis and repair of automotive differentials, four wheel and all wheel drive units. Prerequisite(s): ASE 101, ASE 102 and ASE 150 or permission of Department. Two credits.
  
  • ASE 160 - Engine Removal & Installation

    Credits: 1
    Focuses on lecture and laboratory experiences in the removal and installation procedures of the automotive engine from and into front wheel and rear wheel drive vehicles. Prerequisite(s): ASE 101 and ASE 102 and ASE 130. One credit.
  
  • ASE 161 - Engine Repair and Rebuild

    Credits: 5
    Focuses on lecture and laboratory experiences in the disassembly, diagnosis and reassembly of the automotive engine. Topics include the diagnostic and repair procedures for the engine block and head assemblies. Prerequisite(s): ASE 101 and ASE 102 and ASE 130. Five credits.
  
  • ASE 170 - Laboratory Experience I

    Credits: 0.5 to 6
    Continues to build upon the principles that are expected to be understood by students. Prerequisite(s): ASE 101 and ASE 102 or permission of Department. 0.5 to six credits.
  
  • ASE 210 - Brakes II

    Credits: 3
    Covers the operation and theory of the modern automotive braking systems. Includes operation, diagnosis, service, and repair of the anti-lock braking systems, power assist units and machine operations of today’s automobile. Prerequisite(s): ASE 101, ASE 102 and ASE 110 or permission of Department. Three credits.
  
  • ASE 220 - Specialized Electronics Trng

    Credits: 2
    Provides a systematic approach to automotive electrical systems. Builds from the basic electrical principles and concepts through semiconductors and microprocessors. Features on-bench exercises. Students practice diagnostic procedures that have applications to present and future automotive electronics and electrical systems. Prerequisite(s): ASE 101, ASE 102 and ASE 120 or permission of Department. Two credits.
  
  • ASE 221 - Automotive Body Electrical

    Credits: 4
    Provides a comprehensive study of the theory, operation, diagnosis, and repair of vehicle accessories. Prerequisite(s): ASE 101, ASE 102 and ASE 120 or permission of Department. Four credits.
  
  • ASE 231 - Automotive Computers

    Credits: 2
    Focuses on lecture and laboratory experiences in the inspection and testing of typical computerized engine control systems. Prerequisite(s): ASE 101, ASE 102 and ASE 130 or permission of Department. Two credits.
  
  • ASE 233 - Fuel Injection and Exhaust

    Credits: 4
    Focuses on lecture and related laboratory experiences in the diagnosis and repair of electronic fuel injection systems and modern exhaust systems. Prerequisite(s): ASE 101, ASE 102 and ASE 130 or permission of Department. Four credits.
  
  • ASE 235 - Drivability Diagnosis

    Credits: 1
    Emphasizes lecture and related laboratory experience in diagnostic techniques and the use of diagnostic scan tools, oscilloscopes, lab scopes, multi-meters and gas analyzers. Students diagnose live vehicle driveability problems. Prerequisite(s): ASE 101, ASE 102 and ASE 130 or permission of Department. One credit.
  
  • ASE 240 - Suspension and Steering II

    Credits: 3
    Emphasizes lecture and related experiences in the diagnosis and service of electronic suspensions and steering systems and their components. Prerequisite(s): ASE 101, ASE 102 and ASE 140 or permission of Department. Three credits.
  
  • ASE 250 - Auto Trans/Transaxle Service

    Credits: 1
    Focuses on practical methods of maintaining, servicing, and performing minor adjustments on an automatic transmission and transaxle. Prerequisite(s): ASE 101 and ASE 102 or permission of Department. One credit.
  
  • ASE 251 - Auto Trans/Transaxle Repair

    Credits: 5
    Covers diagnosis, principles of hydraulics, principles of electronic components, power flow, theory of operation, removal of transmission/ transaxle, tear down, replacement of components, measurement and subsequent adjustment of components and replacement of transmission/ transaxle. Prerequisite(s): ASE 101, ASE 102 and ASE 250 or permission of Department. Five credits.
  
  • ASE 265 - Heating and Air Conditioning

    Credits: 5
    Emphasizes lecture and related laboratory experiences in the diagnosis and service of automotive heating and air conditioning systems and their components. Prerequisite(s): ASE 101 and ASE 102 or permission of Department. Five credits.
  
  • ASE 282 - Internship: General (Summer)

    Credits: 1 to 5
    Emphasizes practical on-the-job, work-related experience that corresponds to the area of study. In this semester, the student takes all related sponsor requirements in (STS) Service Training Standards (General Motors) or (“F.A.S.T”) Fundamental Automotive Systems Training (Chrysler) or others as required by the program track. Required as part of AYES program. Prerequisite(s): ASE 101 and ASE 102 or permission of Department. One to five credits.

Aviation Technology

  
  • AVT 101 - Private Pilot Ground School

    Credits: 4
    Prepares student for the Private Pilot Airplane, Single-Engine Land FAA Knowledge Exam. Prerequisite(s): None. Four credits.
  
  • AVT 102 - Private Pilot Flight

    Credits: 4
    Focuses on flight training in preparation for the Private Pilot Airplane, Single-Engine Land FAA Practical Test, and completing requirements for the Private Pilot Certificate. Corequisite(s): AVT 101, or equivalent instruction and approval of department chair. Four credits.
  
  • AVT 103 - Intro to Air Traffic Control

    Credits: 3
    Focuses on the history of the Air Traffic Control System, including its structure, function, and operation. Also includes radar operations and the future of the National Airspace System. Prerequisite(s): None. Three credits.
  
  • AVT 104 - Private Pilot Flght/Helicopter

    Credits: 4
    Focuses on flight training in preparation for the Private Pilot Helicopter FAA Practical Test, and completing requirements for the Private Pilot Certificate. Corequisite(s): AVT 101, or equivalent instruction and approval of department chair. Four credits.
  
  • AVT 105 - Aviation Meteorology

    Credits: 4
    Focuses on recognition, interpretation and evaluation of atmospheric weather as it relates to and affects aviation. Prerequisite(s): None. Four credits.
  
  • AVT 106 - Pinch-Hitter Pilot

    Credits: 1
    Prepares the non-pilot passenger to participate in airplane flight, and to take over and successfully land the airplane should the pilot become incapacitated. Prerequisite(s): None. One credit.
  
  • AVT 108 - GPS for Pilots

    Credits: 1
    Focuses on the Global Positioning System and its uses in aviation. Prerequisite(s): None. One credit.
  
  • AVT 111 - Instrument Pilot Ground School

    Credits: 4
    Focuses on preparation for the FAA Instrument Rating Knowledge Exam. Prerequisite(s): Private Pilot Certificate or consent of department chair. Four credits.
  
  • AVT 112 - Instrument Pilot Flight

    Credits: 4
    Focuses on flight training in preparation for the Instrument Rating, Single-Engine Airplane FAA Practical Test, and completing requirements for the Instrument Rating. Prerequisite(s): Private Pilot Certificate. Four credits.
  
  • AVT 113 - Instrument Flight Trainer

    Credits: 4
    Develops the skills necessary to operate in IFR conditions, using a singleengine flight trainer. Prerequisite(s): Private Pilot Certificate or consent of department chair. Four credits.
  
  • AVT 115 - ATC Phraseology I

    Credits: 1
    Focuses on the proper use of phraseology in the Air Traffic Control System. Prerequisite(s): None. One credit.
  
  • AVT 145 - Simulator Lab I

    Credits: 1
    Reviews attitude instrument flight for students who desire instruction in addition to their normal instrument training, or for rated pilots desiring to upgrade or refresh their skills utilizing the Flight Training Device. Prerequisite(s): Private Pilot Certificate, Airplane Single- or Multi-Engine Land. One credit.
  
  • AVT 146 - Simulator Lab II

    Credits: 1
    Continues training in the Flight Training Device for those having completed AVT 145 (Simulator Lab I). Prerequisite(s): AVT 145. One credit.
  
  • AVT 201 - Commercial Pilot Ground School

    Credits: 2
    Prepares the student for the Commercial Pilot Airplane, Single-Engine Land FAA Knowledge Exam. Prerequisite(s): Private Pilot Certificate with Instrument Rating, or consent of department chair. Two credits.
  
  • AVT 202 - Commercial Flight I

    Credits: 3
    This course is the first of a two-part sequence of flight training in preparation for the Commercial Pilot Certificate, Airplane, Single-Engine Land FAA Practical Test. Consists of the cross country aeronautical experience required for the Commercial Certificate. Prerequisite(s): Private Pilot Certificate with Instrument Rating, or consent of department chair. Three credits.
  
  • AVT 203 - Commercial Flight II

    Credits: 4
    Continuation of flight training in preparation for the Commercial Pilot, Airplane Single-Engine Land FAA Practical Test, completing requirements for the Commercial Pilot Certificate. Prerequisite(s): Commercial Flight I. Four credits.
  
  • AVT 204 - Commercial Flight I/Helicopter

    Credits: 2
    Focuses on the first part of a two-part sequence of flight training in preparation for the Commercial Pilot Helicopter FAA Practical Test. Consists of training and review of those maneuvers required for Private Pilot Helicopter certification with emphasis placed on student performance of these maneuvers to commercial pilot proficiency standards, as well as the introduction of additional maneuvers required for the Commercial Pilot Helicopter Certificate. Prerequisite(s): FAA Private Pilot Certificate. Two credits.
  
  • AVT 205 - Mountain Flying Ground School

    Credits: 1
    Acquaints the student with the unique aspects of flying in mountainous terrain and the additional knowledge and proficiency necessary for safe and efficient operation in mountainous and high altitude terrain. Prerequisite(s): AVT 101 or successful completion of Private Pilot Ground School. One credit.
  
  • AVT 206 - Crew Resource Management

    Credits: 1
    Focuses on classroom instruction coupled with Line-Oriented Flight Training (LOFT) in a Flight Training Device. Covers the knowledge, skills, and attitudes necessary to enhance safety and operate effectively as a member of an airplane crew. Prerequisite(s): Instrument Rating or consent of department chair. One credit.
 

Page: 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11Forward 10 -> 13